My new computer

CPU i5 2500 k

MB Gigabyte GA-Z68A-D3H-B3

Monitor ASUS MS246H

OS Windows 7 x64

Days before, I also have the same problem that so many guys have.
I can't get the output from 2500K via the HDMI port and DVI port after install the driver,
It's fine while using the DVI or HDMI port.But when I install the driver and reboot,there is no display after the screen "Windows Starting".I go into the safe mode uninstall the driver to using the system driver,everything just go fine after reboot.And when I using the VGA port from the MB,there is no problem after install driver.I try many kinds of drivers, the HDMI and DVI port also have no display.

Now I solve the problem using the method as below:
1.prepare a vga-vga line,and connect it from MB vga port to monitor vga port
2.connect a hdmi or dvi line from mb to monitor
3.select the monitor output mode to VGA
4.power on the PC and login the system (Now it's using the vga,so there is no problem)
5.install or reinstall the driver and DO NOT restart after the job is over.
6.press WIN+P and select the duplicate mode (the second one) and press enter to confirm.
7.right click on your desktop and select "screen resolution" ,that you will see your monitor is seperated into two parts (1|2)
8.then change your monitor output mode to HDMI or DVI,Is it working now?
9.remove the vga line,and the output form hdmi or dvi is good

10.reboot the PC and everything is OK

Hope this method is useful to you,thanks.

I am having a problem allocating 64x64 OpenGL textures of the format ALPHA16I_EXT (internal) / ALPHA_INTEGER_EXT.

GPU caps lists the GL_EXT_texture_integer extension as being available. The driver is 10.18.10.3345 (10-31-2013).

The machine is a Dell with a hybrid NVidia/Intel configuration.

My question is more a driver question than a dev question: should the HD 4600 support this texture format? Is there limited support?

Thanks.

So, this monitor is capable of 1920x1200, and indeed older Intel chipsets drive it just fine over VGA.

This chipset (inside a Dell E6540 laptop) will not recognize the resolution above 1920x1080.

Using the custom resolution app leads to a message "The custom resolution exceeds the maximum bandwidth capacity."

Running the system info utility shows me that the mode is supported by the monitor. But notice the order of resolutions. This looks like a bug in the intel mode detection, possibly shared between both utilities.

Is there a fix or workaround for this?:

Intel(R) HD Graphics 4600

Report Date: 12/6/2013

Report Time[hh:mm:ss]: 15:12:07

Driver Version: 9.18.10.3204

Operating System: Windows 7  Service Pack 1(6.1.7601)

Default Language: English (United Kingdom)

Installed DirectX* Version: 11.0

Supported DirectX* Version: 11.0

Shader Version: 5.0

OpenGL* Version: 4.0

Physical Memory: 8097 MB

Processor: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz

Processor Speed: 2693 MHz

Vendor ID: 8086

Device ID: 0416

Device Revision: 06

*   Processor Graphics Information   *

Processor Graphics in Use: Intel(R) HD Graphics 4600

Video BIOS: 2171.10

Current Graphics Mode: 1920 by 1080

*   Devices Connected to the Graphics Accelerator   *

Active Monitors: 1

Active Notebook Displays: 1

  * Monitor *

Monitor Name: HP Compaq LA2405x LED Backlit Monitor

Display Type: Analog

Connector Type: VGA

Serial Number: HWP3020

Gamma: 2.2

DDC2 Protocol: Supported

Device Type: Monitor

Maximum Image Size:

Horizontal: 20.47 inches

Vertical: 12.60 inches

Monitor Supported Modes:

640 by 480 (60 Hz)

800 by 600 (60 Hz)

1024 by 768 (60 Hz)

1280 by 1024 (60 Hz)

1280 by 960 (60 Hz)

1440 by 900 (60 Hz)

1600 by 1200 (60 Hz)

1680 by 1050 (60 Hz)

1920 by 1200 (60 Hz)

1920 by 1080 (60 Hz)

Display Power Management Support:

Standby Mode: Supported

Suspend Mode: Supported

Active Off Mode: Supported

Raw EDID:

00 FF FF FF FF FF FF 00 22 F0 20 30 01 01 01 01

1F 16 01 04 68 34 20 78 EE 01 F5 A2 57 52 9F 27

0A 50 54 21 08 00 81 40 81 80 95 00 A9 40 B3 00

D1 C0 01 01 01 01 7D 4B 80 A0 72 B0 2D 40 88 C8

36 00 06 44 21 00 00 1C 00 00 00 FD 00 32 3F 18

4C 14 00 0A 20 20 20 20 20 20 00 00 00 FC 00 48

50 20 4C 41 32 34 30 35 78 0A 20 20 00 00 00 FF

00 43 4E 34 32 33 31 30 43 53 39 0A 20 20 00 39

Hi all,

I have a Dell Precision M3800 which i have connected to two DGM IPS-2701WPH LCD Monitors (native 2560x1440 60Hz). The Dell provides two video output ports 1 x mini DisplayPort and 1 x HDMI.

Both monitors will display out the native resolution while being powered off the MiniDP port. However from the HDMI port the laptop will only display to 1920x1080 and nothing higher.

Using a Apple MacBook Pro the monitors work fine using HDMI at the full 2560x1440 resolution. so i know it isnt a problem with the monitor end.

Things i have tried,

1. customapp mapping a resolution to 2560x1440 at 30Hz = black screen, and anything higher (refresh rate) - i get a dialog box stating - The custom resolution exceeds the maximum bandwidth capacity.
2. updated to the latest Dell video driver
3. manually installed the latest Intel Video Driver

None of these have resolved the issue. below is a copy of the Intel video report, any advise would be greatly appreciated.

Thanks in advanced

Intel(R) HD Graphics 4600

Report Date:            9/5/2014

Report Time[hh:mm:ss]:        10:53:11

Driver Version:            10.18.10.3345

Operating System:        Microsoft Windows 8.1 Pro(6.3.9600)

Default Language:        English (United Kingdom)

Installed DirectX* Version:    11.2

Supported DirectX* Version:    11.0

Shader Version:            5.0

OpenGL* Version:        4.2

OpenCL* Version:        1.2

Physical Memory:        16193 MB

Processor:            Intel(R) Core(TM) i7-4702HQ CPU @ 2.20GHz

Processor Speed:        2195 MHz

Vendor ID:            8086

Device ID:            0416

Device Revision:        06

*   Processor Graphics Information   *

Processor Graphics in Use:    Intel(R) HD Graphics 4600

GOP Version:            5.0.1032

Current Graphics Mode:        3200 by 1800

*   Devices Connected to the Graphics Accelerator   *

Active Digital Displays: 1

Active Notebook Displays: 1

    *    Digital Display    *

Monitor Name:            Boevt Terra2760WLED

Display Type:            Digital

Connector Type:            HDMI

Serial Number:            WOR2760

Gamma:                2.2

DDC2 Protocol:            Supported

Device Type:            Digital Display

Maximum Image Size:

Horizontal:            23.62 inches

Vertical:            13.39 inches

Monitor Supported Modes:

640 by 480 (75 Hz)

640 by 480 (60 Hz)

720 by 400 (70 Hz)

800 by 600 (75 Hz)

800 by 600 (72 Hz)

800 by 600 (60 Hz)

1024 by 768 (75 Hz)

1024 by 768 (60 Hz)

1152 by 864 (75 Hz)

1280 by 1024 (60 Hz)

1280 by 720 (60 Hz)

1280 by 1024 (75 Hz)

1440 by 900 (60 Hz)

1680 by 1050 (60 Hz)

1920 by 1080 (60 Hz)

2560 by 1440 (60 Hz)

Display Power Management Support:

Standby Mode:            Supported

Suspend Mode:            Supported

Active Off Mode:        Supported

Raw EDID:

00 FF FF FF FF FF FF 00 5D F2 60 27 00 00 00 00

01 16 01 04 A3 3C 22 78 FE EE 95 A3 54 4C 99 26

0F 50 54 A5 CB 00 71 4F 81 C0 81 80 95 00 B3 00

D1 C0 01 01 01 01 56 5E 00 A0 A0 A0 29 50 30 20

35 00 55 50 21 00 00 1A 00 00 00 FF 00 4E 41 0A

20 20 20 20 20 20 20 20 20 20 00 00 00 FD 00 17

4C 0F 63 19 00 0A 20 20 20 20 20 20 00 00 00 FC

00 54 42 44 0A 20 20 20 20 20 20 20 20 20 01 16

02 03 1F F1 4C 01 02 03 04 05 07 90 12 13 14 16

1F 23 09 07 07 83 01 00 00 65 03 0C 00 10 00 02

3A 80 18 71 38 2D 40 58 2C 45 00 FE 1F 11 00 00

1E 01 1D 80 18 71 1C 16 20 58 2C 25 00 FE 1F 11

00 00 9E 01 1D 00 72 51 D0 1E 20 6E 28 55 00 FE

1F 11 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10 3E 96

00 FE 1F 11 00 00 18 01 1D 00 BC 52 D0 1E 20 B8

28 55 40 E8 12 11 00 00 1E 00 00 00 00 00 00 07

    *    Built-in Display    *

Monitor Name:            Generic PnP Monitor

Display Type:            Digital

Connector Type:            Embedded DisplayPort

Serial Number:            SHP13F8

Gamma:                2.2

DDC2 Protocol:            Supported

Device Type:            Built-in Display

Maximum Image Size:

Horizontal:            13.78 inches

Vertical:            07.48 inches

Monitor Supported Modes:

3200 by 1800 (60 Hz)

Display Power Management Support:

Standby Mode:            Not Supported

Suspend Mode:            Not Supported

Active Off Mode:        Not Supported

Raw EDID:

00 FF FF FF FF FF FF 00 4D 10 F8 13 00 00 00 00

22 17 01 04 A5 23 13 78 0E DE 50 A3 54 4C 99 26

0F 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01

01 01 01 01 01 01 CD 91 80 A0 C0 08 34 70 30 20

35 00 5A C2 10 00 00 18 00 00 00 10 00 00 00 00

00 00 00 00 00 00 00 00 00 00 00 00 00 FE 00 36

52 47 57 30 80 4C 51 31 35 36 5A 31 00 00 00 00

00 02 01 03 28 00 12 00 00 0B 01 0A 20 20 00 1B

* Other names and brands are the property of their respective owners. *

Using the latest drivers 10.18.10.3945 I tried out Arma 3 and after 10 minutes I crashed. It keeps happening every time I try. I looked around for fixed and it was to revert to a older patch. But I don't want to revert to a older driver and lose performance completely.

I cannot update my Intel HD 4000 driver. Whenever i intall it, it will say "This operating system is not supported". I even try to install manually but it's up to date eventhough its a 2012 driver. My laptop is HP and it is OEM. Tried finding solutions but cannot. 1 thing to note, i did a system recovery yesterday to factory settings. Before that i can install the driver.  I even check with the HP websites and it gave me 2012 drivers. Need help ASAP!

Hi,

I'm suddenly having BSOD Video_TDR_Failure igdkmd64.sys for no reason. I wasn't even doing anything on my laptop.

I've tried both the 3907 and 3621 to no avail.

It'll show "Display driver stopped responding and has recovered" with lots of dead pixels and crashed to BSOD.

The only option I currently have is by disabling my display adapters. Please help

page not found errors Everywhere?? Please help me find graphics driver for "Intel HD Graphics (Bay Trail) for windows 7 64-bit"

Intel Celeron j1900 processor

Links don't work when i try to click them!

Intel® Download Center

I even tried ones that aren't for my hardware just as a test and none of the other links except some for windows xp work and i dont have windows xp!

does not work! please fix page not found so i can download the latest driver for my HD graphics i dont want to be stuck with old driver forever!

Is the Celeron B820 GPU on the motherboard or in the CPU chip? I am wondering this because I am concerned about GPU temps while running Microsoft Flight Simulator X. The cpu and GPU actually runs the game pretty well for a Dual core. And would the computer shut off if the gpu overheated?

Hi,

we are testing Haswell systems with new 28" UHD-resolution Display Samsung U28D590D.

This monitor has DP1.2 and HDMI 1.4a inputs.

As expected, 3840x2160@30Hz works via HDMI on Haswell platforms.

Unfortunately, via DisplayPort, no 4K resolution works with this display.

Via DP, Haswell until now only seems to be able to use Multi-Stream Transport (MST) to display 3840x2160@60Hz.

With Single Stream (SST), only 3840x2160@30Hz seems to be possible.

The Samsung U28D590D seems to expect High Bitrate 2 mode with 5.4 GT/s via DP (HBR2).

According to datasheets, Haswell (4th gen Core i) does support HBR2.  But is it really usable?

Driver is 15.33.18.64.3496 on Windows 8.1 x64

Christof

Hey. I recently put together a computer with a 4970k processor and Intel 4600 Graphics. However, my computer has been freezing randomly and crashing due to the graphics conflicting with my additional R9 295x2 Graphics card. My OS is Windows 8.1, 64-bit. I have installed the most recent drivers for the 4600 as well as the most recent stable AMD drivers for the R9 295x2. I do not see the Intel 4600 Graphics in my Hardware List, so I cannot disable them. I have told my motherboard's BIOS to use the PCIE graphics card as the main card, and yet my system continues to freeze and crash. Today alone I have had four crashes due to this issue. How can I solve this issue?

The description of the crash log:

Faulting Application Path:    C:\Windows\System32\igfxCUIService.exe

Problem signature

Problem Event Name:    APPCRASH

Application Name:    igfxCUIService.exe

Application Version:    6.15.10.3907

Application Timestamp:    53e0fb5e

Fault Module Name:    igfxCUIService.exe

Fault Module Version:    6.15.10.3907

Fault Module Timestamp:    53e0fb5e

Exception Code:    c0000005

Exception Offset:    00000000000172b9

OS Version:    6.3.9600.2.0.0.768.101

Locale ID:    1033

Additional Information 1:    a03e

Additional Information 2:    a03e22ea5e38d993ad1adaeaeef6014d

Additional Information 3:    c832

Additional Information 4:    c832973209a1e3cf18399711242902d8

Extra information about the problem

Bucket ID:    103a23d86f068b17a958745f2fc3a3c8 (85948040035)

Hi. From what I've been able to gather, my CPU's (i7 3770) integrated graphics won't kick in without a monitor connected. The way I've worked around this is by using Microsoft's RDP which apparently makes the integrated graphics kick in. Under screen resolution on my Windows 8.1 machine I can see that before I connect with RDP it says "Display device on: VGA" and after I connect it says "Unknown Monitor on RPUDD Chained DD".  I am not able to physically connect a monitor to this machine, nor a dummy plug, and so I am looking for a way to keep my integrated graphics on even outside of RDP. Currently the application I am running on my machine, a 3D accelerated one, will stop functioning correctly when I quit my RDP session and the display reverts back to "Display device on: VGA".

So the question is if I can keep the integrated graphics on my CPU functioning even without a monitor connected, when the display shows as "Display device on: VGA".

Thank you.

Hi. My computer is:

- Main: foxconn H61-MXE

- CPU: intel celeron G540 (2,5 Ghz)

- RAM: 2x2 = 4G - Windown 7 (32bit)

- PSU: 230W

Now I want to buy a vga card, so what's vga card for CPU g540? I like Nvidia GT 730 DD5, 1G. Isn't good? How power for a PSU?

Please help me! Thanks!

Whenever I run arma 3 my game will crash within 5-30 minutes with the message D3D Error - DXGI_ERROR_DEVICE_REMOVED. I have an Intel(R) HD Graphics 2500. Any help would be appreciated.

Hey ho,
Two weeks ago i'v re installed my computer. Before one week i re-installed Battlefield 4 and i startet playing. I noticed a error message that told me that there is not enough memory is available. I'v never had this error before. After 2 weeks of testing and finding the problem i noticed that everytime i run a game at another resolution than my desktop resolution my virtual memory is linea filling up to 100%. After it reaches the 100% mark, the Windows Error message shows up and it wants me to close the game that i'm playing. If i run the game at the same resolution than the desktop resolution or in windowed mod this doesnt happen. If i switch back to the desktop, the virtuel memory is will be cleared again.

What i'v already tried:

• Re-installed DirectX
• Repaire Visual Studio 2013
• Cleaned and re-installed Nvidia and Intel HD drivers
• Used a old version of Nvidia drivers
• Used a old version of Intel HD drivers
• Re-installed Windows 8 Intel chipset drivers and sata
• Different amounts of virtual memory
• Moved the virtual memory from sdd to hdd
• Checkdisc
• Re-installed the games
• Checked memory usage and programms
• De-installed Avira AntiVir
• Re-installed Windows 8.1

My system

• Intel i7-3610QM
• 8,00 GB - 1600MHz
• 120 GB SSD
• 1 TB HDD
• Nvidia Geforce GT650M - 2 G
• Intel HD 4000 - 256 MB
• Asus N76VZ Notebook
• Virtual memory on SSD 8 GB to 16 GB
• Windows 8.1 64x
• Avira AntiVir

i have updated the driver of pentium g3240 hd graphic to the latest version

but in quick game there is still something wrong with the nba2k15 ，especially the player on court while it's all right in streetball play.

i wonder if there is a way to solve it,thank you

I have Inspiron 1764:

procesor Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz

Memory 4GB

Windows 7 Home Premium 64-bit operating system

Intel(R) HD Graphics driver 8.15.10.2104

ActivX 11

Everything isup to date!

TodayI downloaded Windows Essentials 2012 but Movie Maker not work!!! I have this mesage:

"Sorry, Move marker can't stop! ... etc"

I askedMicrosoftaboutthis problem, andthey saidthis:

Hi Dumitru,

We have checked the latest driver on Dell website and it seems the driver is too old. Please wait for your computer manufacturer's response because they might have newer versions for the driver.

The Dell producerdoes not replyanything! Please help my with new driver from Intel(R) HD Graphics driver 8.15.10.2104!

Theank you!

When I attempt to play the game OpenRA (OpenRA - Home), the graphics driver crashes completely, taking out with it the Desktop Window Manager (dwm.exe) but eventually recovering.

The game performed fine on the previous driver version. The game developers say Intel is at fault, since no changes were made on their end. Again, the game works fine under previous drivers.

I am running Windows 7 64-bit SP1, with the latest drivers for all hardware including BIOS/UEFI. Everything is up-to-date.

Any ideas as to when we can expect a driver update?

From the crash dialog:

Problem signature:

  Problem Event Name: APPCRASH

  Application Name: OpenRA.Game.exe

  Application Version: 0.0.0.0

  Application Timestamp: 543a500c

  Fault Module Name: ig75icd32.dll

  Fault Module Version: 10.18.10.3907

  Fault Module Timestamp: 53e0fef4

  Exception Code: c0000005

  Exception Offset: 00042028

  OS Version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional Information 1: 0a9e

  Additional Information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional Information 3: 0a9e

  Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Hi,

I got a problem with my Intel HD Graphics 4000 device. I had system with Intel Core i736QM with Intel HD Graphics 4000 and a GForce GTX675M Nvidia Grapichs running on Windows 7, the drivers worked properly and I could see both 2 devides listed on the Windows Device Manager.

Two months ago I upgrade to Windows 8 (actually is intalled Windows 8.1) and I started to install all driver from the software support center (Samsung), then I installed de Nvidia Drivers, I can run games and work whit the full resolution dispplay but I found than the Intel HD Graphics 4000 is no longer listed on the Device Manager

I have tried to install the Intel Drivers but isn't working , when I try to install I get the message "This computer does not meet the minimum requirements for installing the software"

What can I do for get Intel graphics be recognized by Windows

Thanks

hi everyone,

    Now,we use Intel® Core™ i7-610E Processorand internal integrated Intel® HD Graphics GPU to implement Graphics display function on the new real-time operating system which is Deos similar to uC/OS-II. On the Deos, we need to complete OpenGL SC1.0 hardware implementation and GPU driver development, but we have no experience  in this regard. I'm very eager to get some help from the community to provide us some methods and advice and assess workload for graphics display development!

    Thank you!